Verex Monitor ISM Installationsanleitung PDF herunterladen (Seite 20)

14 xL Simplified Installation Guide

21-3601E rev1.3

Areas ◄ A02 – A16 ► undefined

A01 Defaults Press ↓Ok to ◄Edit►

Area Name Area Entry

Delay

Select a time.

Area Exit

Delay

Select a time.

Exit Delay Mode

Normal

Warning Tone Short, Warning

Tone Long, Warn & Block

(Warning Tone & Block Arming).

Fail to Exit Mode

Door Close, Push

Button, Both, None

Default: OFFICE

(UK ACPO = “AREA

DESCRIP”)

Default:

45 Seconds

(UK ACPO = 30 sec)

Default:

60 Seconds

Default: Normal

(UK ACPO = Warn & Block)

Default: Door Close

(UK ACPO = Push Button)

STAY on Fail to

Exit

Alarm on Fail to

Exit

Exit Delay on Fail to

Exit

Area Report Mode

Selections:

Full, Emergency

Bell Squawk

None, On Arming, Fail

to Arm, Both.

Default: No Default: No

(UK ACPO = Yes)

Default: No

(UK ACPO = Yes)

Default: Emergency Default: None

(UK ACPO = Fail to Arm)

Modules ◄ M01 – M24 ►

M01 Defaults, M02 – M24 undefined.

Module Serial #

Enter the 5 digit number from the

sticker on the module’s circuit board.

NOTE: When “ÈOk” is pressed after

entering the Serial #, you may be

transferred out of programming.

Return to Module Programming to

continue programming the module.

Module Type

I/O = input / output

Selections: Use the left and right arrow keys to browse the module names.

Keypad:

LCDV2, LCD Plus, LCD-GProx, LCD-ExtRd (external reader),

Wireless:

WLS, FA400, EE4000,

HSC

Power:

IPSU 1.1AMP

Vigil

Other

Access:

Regular V2, Regular V1, TDC, PDC, C2000, IPlus, 2050MIL250,

2050DC,

I/O:

Regular, E-I/O, IPMUX, 2050IO16, 2050I32, 2050O32

Elevator

Suite Security:

Suite 8 zone, Suite 2 zone

Default: 00000

Default: LCD-GProx

Number of Inputs

Selections: 00, 04,

08, 12, 16, 20, 24,

Number of Outputs

Selections: 00, 04,

08, 12, 16, 20, 24, 32

Module in Area?

Assign the module to the

area it is in.

Tamper Monitor

Exit Delay Level

Stay & On, On

Only, None

Default:

08 inputs

Default:

04 outputs

Default:

A01: OFFICE

(UK ACPO = “AREA DESCRIP”)

Default:

Yes

Default:

Stay & On

Tone Warnings

Yes/No

Default:

Yes

Annunciate Area

Map

(KeyPad tones)

Press the button below “ÈEdit “ to make changes. Scroll through the areas at the top of the

screen using the left and right keypad arrows. When an area appears that needs to cause

this keypad in this area to annunciate tones for e.g. alerts, exit tones from the other area,

press the keypad button below ÈYes or ÈNo to assign the other area(s) to this keypad. A

check mark

9will appear beside the Yes or No selection. Default: 9(Yes) for Area 1

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Kommentare zu diesen Handbüchern

Keine Kommentare

Verex Monitor ISM Installationsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Verex Monitor ISM