Verex Monitor ISM Spezifikationen PDF herunterladen (Seite 25)

22-9058 v2.1

Welcome PCPanel IP

Cent. Mon. with IP

Ref. Topics

3.2.3 1st (or only) Panel for this Connection

IP Module

RJ45

To Network

DTR

CTS

TB15

TB2

Main

Panel

TB2

TB15

TB14

Locator

Orange wire

Blue wire

To 1

slave board

if multi-panel

(RS-485, shielded).

See next diagram.

Shared w/ PCPanel via IP (if applicable)

Main Panel

Module Bus

(assoc. with

any ext. P/S)

12 3 4

298-8522

(3A)

TB10 - TB13

'B'

Connector

Black wire

+12V

Data A

Data B

∗

Power Considerations

4321

SIP 485A

SIP 485B

SIP 485 0V

}

Red wire

TB14

Prewired terminal

blocks for

connections on

motherboard are

supplied. See

Sect. 4.2, figure 5.

Other wires on this Unit: used

ONLY with PC-to-Panel via IP

(for wiring, see section 2.3)

+12 v

∗

(+)

(-)

If separate P/S used instead, IP board TB2-3 (Dir Ground) must be

shorted to related motherboard TB16-3 (0V).

See Sect. 4.2, Figure 5.

If P/S is interfaced with Module Bus remotely to help power

other devices (+12V connection), install isolating diodes (3

A; P/N: 298-8522) at the panel (Module Bus +12, with band

facing away from panel connection).

During Configuration: 12V power and a LAN (not WAN)

connection is required when configuring the IP Module.

TB1

Use 24 AWG, 4 conductor comms cable FT4 P/N 120-3401, FT6 P/N 120-3405. Add a 2

same cable

for cable runs over 4 wires. Use 18AWG power cable FT4 P/N 120-3400, FT6 P/N 120-3404 for power

supply connections.

For more detail on power and grounding requirements, refer to sections 1.4 and 1.5.

3.2.4 Additional Panels on Multi-Panel Connection

2 - 30

TB2

TB15

TB14

Locator

To slave board

for next panel

(if applicable)

IP Slave

Board

Black wire

}

Green wire

Yellow wire

not used

SIP 485 B

SIP 485 A

SIP 485 0V

}

Red wire

(RS-485,

shielded)

SIP 485 B

SIP 485 A

SIP 485 0V

DTR

CTS

TB15

43215

TB14

Blue wire

Orange wire

at Panel

2 - 30

Panel

Prewired terminal blocks for

connections on motherboard are

supplied. See Sect. 4.2, figure 5.

TB2

+12 v

∗

(+)

(-)

RJ45

To Network

IP Module at 1

panel

TB1

See Sect. 4.2, figure 4 or 5.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Verex Monitor ISM Spezifikationen Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Verex Monitor ISM