Verex Monitor ISM Spezifikationen PDF herunterladen (Seite 43)

22-9058 v2.1

Welcome PCPanel IP Cent. Mon. with IP

Ref. Topics

4.5 Alternate Configuration Modes

4.5.1 Telnet

• Telnet is a standard PC communications format that can be used in place of the IP Config

Program.

• It can connect with a selected IP Interface Module and display its program settings in a text-

based window, to make changes to them.

WARNING: The IP Interface Module Configuration Program must be used to program an

IP board with its IP address for the first time. Telnet can be used to make subsequent

changes to the IP board’s program settings afterwards.

Using Telnet Procedure example: Using Windows 2000.

•

Click Start/Run. Enter (with example IP address) “telnet 167.17.98.41 9999” (NOTE: 9999 is a

standard Telnet port number) in the Open: line. Press OK. The telnet window will open and

display the following:

• After typing ‘0’ and pressing enter, you will be prompted for the access password if you

established one when you originally programmed the IP board with its IP address etc.

• After entering the password and pressing enter, pertinent board info such as IP address will

appear as well as a self-explanatory menu to follow for making changes to the board’s program.

• After making changes, enter “9” for Exit with Save at the “Enter menu selection:” and press

Enter. Exit Telnet and changes will then be enabled at the board.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

Keine Kommentare

Verex Monitor ISM Spezifikationen Seite 43