Verex MONITOR AFx Betriebsanweisung PDF herunterladen (Seite 199)

500-9041 v4.1

Welcome Report Control Admin

Sys Config

Tech-Ref

193

commands) on a suite-security keypad,

refer to the user's guide for the keypad.

To enable function-key authority for a suite

occupant, refer to the "Function Keys"

setting under "Authorities for

Users/Entrants".

- Enable Quick Arming:

If this is NOT

selected, keypad arming functions will

require entering your PIN (person with

appropriate authority). If this IS

selected, the keypad arming functions

will NOT require PIN entry;

- Allow Forced Arm:

Whether or not

the suite-security system can be

armed while any sensors are tripped

(i.e., Not OK).

- Auto Arm on Door Close:

The keypad will arm

automatically when the door is closed. This

would be used

only

for a separate keypad that

is monitoring a safe/vault or 'valuables' locker.



Inputs



- Point Type:

The type of sensor/monitoring to be

used with each input connection (E/E door, PIR,

etc.), and whether or not the sensor is on the

perimeter of the suite/facility.

Tip:

Pause the mouse cursor over a point-type in the

list to view its characteristics.

Note:

Use the 'Entry/Exit

Door' input-point type for doors (door sensors /

contacts) on the perimeter of the suite/facility.

Two-zone Keypads: These units support input points 1

and 2 only.

Custom Point Types can be set up for special

applications (including extended delay).

See:

"Input Points--Custom Point Types".

- Circuit Type:

The type of circuit/wiring used

with the input point / sensor;



Keypad Panic



- Point Type:

The type of alarm to be generated

(E/E door, PIR, etc.) when someone presses

each of the three panic-key pairs on the suite-

security keypad.

Tip:

Pause the mouse cursor

over a point-type in the list to view its

characteristics.

Two-Zone Keypads: These units support the first

panic key only (triggered by pressing

∗

and

- Audible Alarm:

Whether or not an audible

alarm is to be sounded when a panic key is

pressed.



Outputs



-Type:

The general type of event that will trigger

the output. These include "Area" (suite),

'"Point", or "Function Key";

Two-Zone Keypads: These units support output #1

only.

Function keys:

Rem:

8-zone keypad:

;

Two-zone:

∗

. These can be assigned as positive or

negative—indicating whether the output will be set to

+12V (positive) or 0V/Gnd (negative) when the

function keys are pressed. Exception: 2-zone = Neg.

(0V/Gnd) only.

Area (Suite)

Siren

Applications: Use output #1 for

this.

'Toggle' Function: To have a function key 'toggle' the

state of output #1 (only), use the following settings:

Type Function Delay

Function Key (Positive Logic) Function Key 1 (or 2) None

- Point No.

(for 'point' type functions)

A specific

point to be monitored for the "Function" selected

below.

- Function:

The specific event/action that will

trigger the output;

-Delay

(for function keys): Function keys can be

set to either ‘toggle’ the state of the output

(activate/deactivate), or to trigger the output for

a set period of time (from 1 second to 1 week).

The maximum number of delayed function keys that

can be set up for each panel is 35 (i.e., that are not set

to ‘toggle’ or ‘1 second’).

Configuration

Suite Security

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 323 324

Kommentare zu diesen Handbüchern

Keine Kommentare

Verex MONITOR AFx Betriebsanweisung Seite 199

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Verex MONITOR AFx