Verex MONITOR AFx Betriebsanweisung PDF herunterladen (Seite 205)

500-9041 v4.1

Welcome Report Control Admin

Sys Config

Tech-Ref

199

(ensure the proper installation instructions

have been followed).

- Detect Antipassback:

This enables /

disables the Antipassback feature for

this reader.

Antipassback (APB): A feature that blocks

individual

cards from being used to:

Re-enter the same area, or;

Re-enter the facility from 'outside', and/or;

(Optional): Enter other areas;

…Unless

they are recorded as exiting first-

-i.e., each person must use their card/token

at every reader they encounter (that is set

to "Detect Antipassback").

Tip:

This helps

to protect against unauthorized card usage.

Note: Antipassback-controlled areas typically require

an exit reader on each door.

Antipassback operation can be customized on an

area-by-area basis. For details, refer to

"Antipassback" under "Areas and Related Settings".

The antipassback status can be reset for a specific

user, or for all users in a specific area (to allow their

next entry or exit regardless of their previous APB

status). For details, refer to "Resetting Users'

Antipassback Status", and/or "Resetting the

Antipassback Status for Users in a Specific Area" in

the Control & Status Chapter.

-Log APB Violation Only:

This will cause

APB violations to be recorded, while allowing

the person to enter.

-Enable Class Checking:

Selected ( ): This selection is

required

if user-

access to this

reader is to be controlled based on time of day

and/or door class.

See

[Class Map]

to follow/below. Not Selected:

Provides 24-hr access/egress to all valid cards

regardless of the users' assigned schedule and

door class authorities.

-------------------------

[Class Map]

- Schedule, In / Out of schedule

, and

Class

A/B/C:

These settings allow restricting

access to only the users with specific door-

class authority, and/or optionally blocking

after-hours access to this specific reader

(except users with 'Master Override'

authority). If scheduled, a different set of

door-class requirements can be selected for

when the schedule is active versus outside of

the chosen schedule.

To block after-hours access to this reader, select "Out

of Schedule" None. To remove class restrictions at

this reader (without bypassing each user's assigned

schedule), select A , B , C for both "In Schedule"

and "Out of Schedule".

Related Settings:

•

User's door-class authorities and scheduling are set

under: Authorities, Profile 1-4 ,

Door

Class

. See: Authorities for Users / Entrants.

-------------------------

- Card Disable:

This is a special-use feature that

disables the selected type of cards when

presented (sets them as 'expired'). This is for a

separate reader that is not associated with a

physical door. (This reader will not trigger the

unlock circuit.)

Never: Normal operation (cards not disabled);

Escort-Required Users: Users with "Visitor (Escort

Required)" authority. (Although an escort's card will

not be needed at this reader.);

Temporary Users: All cards that are set with an expiry

date;

All Users: All cards presented at this reader (with

authority for its area).

(With this application, the reader's area should be set

as the one the reader is 'in'--since it isn't being used to

access a different one).

Related Settings:

•

Users, Validation ,

Invalid On

See: Users (Entrants/Panel Users).

•

Authorities, Profile 1-4 , Access ,

Visitor

(Escort Required)

See: Authorities for Users / Entrants.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 323 324

Kommentare zu diesen Handbüchern

Keine Kommentare

Verex MONITOR AFx Betriebsanweisung Seite 205

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Verex MONITOR AFx